Description
| Charger Model Number |
EPS-CP090A-MOL39 |
| Input |
Rating Input Voltage |
100~240Vac 50/60Hz |
| Input Voltage Range |
90~264Vac |
| Rating Input Current |
2A rms |
| OutPut |
Voltage |
19.5V DC ±5% |
| Constant Charge Current |
0 to 4.62A Support surge load at 5.3A for 60s |
| Output Ripple and Noise |
150 mV peak to peak or less. |
| Max Output Power |
90W |
| Line & Load Regulation |
±2% Max. (line), ±5% Max (load) |
| Turn on Delay Time |
2 Sec.Max.@100Vac with full load |
| Environment |
Operating Temperature and humidity |
0°C ~ +40° C @ 5-90% Humidity, Non-condensing |
| Storage Temperature |
-40° C ~ 80°C |
| Vibration resistance |
10-300Hz sweep, const. acceleration of 1.0G (Breadth: 3.5mm) For 1 hour |
| Impact resistance |
1 meter drop test >= 2 times, Non-operating condition. |
| Safety |
Max. temperature rise |
< 40°C on casing |
| Standards |
UL/CUL-(UL60950-1),TUV/GS-(EN60950-1),CCC-(GB4943) , PSE-(J60950-1),EK-(K60950-1) |
| Mean Time Between Failures |
100000 hrs at 25 deg C Maximum |
| Hi-Pot Insulation |
i/p to o/p: 3000Vac (1 min.) cut-off current =10mA |
| Dimensions |
146mm x 70mm W x 17.7mm T |
| Nominal Weight |
Approx. 990g |
| Connector |
Molex 3901-2020, pin1 (+) & pin2 (-), Cable length 6.5” +/-0.5” |
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_timeout_wc_related_707', '1746744829', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_wc_related_707', 'a:4:{i:0;s:3:\"698\";i:1;s:3:\"700\";i:2;s:3:\"702\";i:3;s:3:\"704\";}', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)
