LIP-1S1Px18650-22-PMol51
$0.01
Description
| Packaging |
One piece of high quality 2200mAh Lithium 18650 cells with Protection Circuit Module (PCM), 10K NTC thermistor and Molex connector with terminals |
| Capacity |
Typical |
2200 mAh (0.2C discharge) |
| Minimum |
2200 mAh |
| Charging Voltage |
|
4.2V +/-0.05V |
| Standard Charge Current |
|
660mA (0.3C) until current ≤0.01C |
| Max. Current |
Charge |
2200mA (1C), recommend 0.5C (1100mA) for fast charge. |
| Discharge |
3300mA ( 1.5C but limit by PCM below) |
| Ambient temperature |
Charge |
0 deg C to 45 deg C |
| Discharge |
-20 deg C to 60 deg C |
| Storage |
-5 deg C to 35 deg C |
| Nominal Weight |
|
Approx. 50g |
| One Protection Circuit Module |
Overcharge |
4.3V ±0.05V |
| Overdischarge |
<2.5V +/-0.1 |
| Max. Cont. Current |
2A |
| Current Limit |
2.2-3.4A |
| Current Consumption |
10uA |
| Protection Circuit Resistance |
≤65mΩ |
| Short Circuit |
Protection |
| Thermistor |
|
10KΩ NTC thermistor (b value=3435K) |
| PTC Overcurrent Circuit Protection |
NA |
| Wiring & Connection |
|
Approximately 3 x 2″ (50mm, 24AWG) in length with Molex 51004-0300 connector (0500118000 crimp terminals). Pin 1 (BLK (- or common), Pin2 RED (+) & Pin3 Yel (thermistor) |
|
| Approx. Weight (g) |
50g |
| Dimensions |
18.2-22mm D x 67.5-69mm L |
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_timeout_wc_related_1082', '1746795924', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_wc_related_1082', 'a:24:{i:0;s:3:\"868\";i:1;s:3:\"875\";i:2;s:3:\"877\";i:3;s:3:\"887\";i:4;s:3:\"892\";i:5;s:3:\"895\";i:6;s:3:\"900\";i:7;s:3:\"904\";i:8;s:3:\"909\";i:9;s:3:\"915\";i:10;s:3:\"919\";i:11;s:3:\"927\";i:12;s:3:\"933\";i:13;s:3:\"937\";i:14;s:3:\"941\";i:15;s:3:\"943\";i:16;s:3:\"947\";i:17;s:3:\"951\";i:18;s:3:\"956\";i:19;s:3:\"957\";i:20;s:3:\"961\";i:21;s:3:\"965\";i:22;s:3:\"968\";i:23;s:3:\"971\";}', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)
