LIP-3Px18650-26-PTMol43
$0.01
Description
| Packaging |
Three pieces of high quality 2600mAh Lithium 18650 cells with Protection Circuit Module (PCM) and PTC circuit protection |
| Nominal Voltage |
3.6V |
| Capacity |
Typical |
7800 mAh (0.2C discharge) |
| Minimum |
7800 mAh |
| Charging Voltage |
|
4.2V +/-0.05V |
| Standard Charge Current |
|
2350mA (0.3C) |
| Max. Current |
Charge |
3900mA (0.5C) |
| Discharge |
11700mA ( but limit by PTC below) |
| Ambient temperature |
Charge |
0 deg C to 45 deg C |
| Discharge |
-20 deg C to 60 deg C |
| Storage |
-5 deg C to 35 deg C |
| Discharge Cut-Off Voltage |
|
2.5V |
| Nominal Weight |
|
Approx. 147g |
| Dimensions |
approx. 56mm H x 68mm W x 19mm T |
| One Protection Circuit Module |
Overcharge |
>4.3V +/-0.05 |
| Overdischarge |
<2.5V +/-0.1 |
| Current Limit |
5 amp (limit by PTC Fuse below) |
| Short Circuit |
Protection |
| Thermistor |
|
Thermistor |
| PTC Overcurrent Circuit Protection |
Polyswitch SRP420F (4.2A protection)or equivalent |
| Wiring & Connection |
Approximately 3 x 7″ (22AWG) in length with Molex 436450300 connector. Pin 1 White (therm), Pin 2 RED (+) Pin 3 Black (- or com) |
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_timeout_wc_related_1150', '1747256962', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_wc_related_1150', 'a:24:{i:0;s:3:\"868\";i:1;s:3:\"875\";i:2;s:3:\"877\";i:3;s:3:\"887\";i:4;s:3:\"892\";i:5;s:3:\"895\";i:6;s:3:\"900\";i:7;s:3:\"904\";i:8;s:3:\"909\";i:9;s:3:\"915\";i:10;s:3:\"919\";i:11;s:3:\"927\";i:12;s:3:\"933\";i:13;s:3:\"937\";i:14;s:3:\"941\";i:15;s:3:\"943\";i:16;s:3:\"947\";i:17;s:3:\"951\";i:18;s:3:\"956\";i:19;s:3:\"957\";i:20;s:3:\"961\";i:21;s:3:\"965\";i:22;s:3:\"968\";i:23;s:3:\"971\";}', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)
