Description
| Packaging | High quality lithium Polymer cell (LP031418) with PCM Protection module | |
| Nominal Voltage | 3.7V | |
| Capacity | Typical | 60 mAh |
| Minimum | 50 mAh | |
| Max. Current | Charge | 30mA (0.5C) Max, 0.2C-0.3C charge recommended |
| Discharge | 60 mA (1C) | |
| Ambient temperature | Charge | 0 deg C to 45 deg C |
| Discharge | -20 deg C to 60 deg C | |
| Storage | -20 deg C to 25 deg C | |
| Cell internal Impedance (at AC 1KHz) | ≤ 500mΩ | |
| Nominal Weight | Approx. 1g | |
| Dimensions (maximum) | 20.0mm (+/-0.5) L x 14.0mm (+/-0.3) W x 3.0mm (+/-0.2) T See below dimension requirements | |
| One Protection Circuit Module | Overcharge | >4.28V ±0.07V (reset at 4.08V ±0.07V) |
| Overdischarge | <2.4V ±0.1V (reset at 3V +/-0.1V) | |
| Current Limit | 2-5A | |
| Short Circuit | Protection (320uSec) | |
| Approx. Weight (g) | 1.0g | |
| Dimensions | 20.0mm (+/-0.5) L x 14.0mm (+/-0.3) W x 3.0mm (+/-0.2) T | |
| Thermistor | NA | |
| Wiring & Connection | Wire sizes are to be 30AWG (with a diameter of ≤0.80mm), tinned and 25 +/-2mm in length – Red (+) & Black (- or com). Battery pack power wires are to be routed on one side of the cell as shown. | |
