Description
Packaging |
Two pieces of high quality 2600mAh Lithium 18650 cells with Protection Circuit Module (PCM) & PTC current Protection |
Nominal Voltage |
7.4V |
Capacity |
Typical |
2600 mAh (0.2C discharge) |
Minimum |
2550 mAh |
Charging Voltage |
|
8.4V +/-0.05V |
Standard Charge Current |
|
<1300 mA (<0.5C) |
Max. Current |
Charge |
2600mA |
Discharge |
2600mA |
Ambient temperature |
Charge |
0 deg C to 45 deg C |
Discharge |
-20 deg C to 60 deg C |
Storage |
-5 deg C to 35 deg C |
Discharge Cut-Off Voltage |
|
5.4V |
Nominal Weight |
|
Approx. 92g |
Dimensions |
|
approx. 70mm H x 40mm W x 19mm T |
One Protection Circuit Module |
Overcharge |
>8.6V |
Overdischarge |
<5.4V |
Current Limit |
2.0 to 3.0 amp |
Short Circuit |
Protection |
Thermistor |
10 K Ohm located in between cells |
PTC Overcurrent Circuit Protection |
Polyswitch SRP200F (2A protection)or STP200 (equivalent) |
Wiring & Connection |
Approximately 2 x 6″ in length. 24 AWG open wires (RED (+) & Black (- or com) |
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_timeout_wc_related_1166', '1745955708', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_wc_related_1166', 'a:24:{i:0;s:4:\"1039\";i:1;s:4:\"1130\";i:2;s:4:\"1133\";i:3;s:4:\"1135\";i:4;s:4:\"1138\";i:5;s:4:\"1141\";i:6;s:4:\"1148\";i:7;s:4:\"1151\";i:8;s:4:\"1154\";i:9;s:4:\"1157\";i:10;s:4:\"1159\";i:11;s:4:\"1161\";i:12;s:4:\"1164\";i:13;s:4:\"1170\";i:14;s:4:\"1172\";i:15;s:4:\"1176\";i:16;s:4:\"1178\";i:17;s:4:\"1181\";i:18;s:4:\"1183\";i:19;s:4:\"1185\";i:20;s:4:\"1190\";i:21;s:4:\"1192\";i:22;s:4:\"1195\";i:23;s:4:\"1200\";}', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)