LPP-2Sx4546103-PTMol51
$0.01
Description
| Packaging |
Pack consists of two high quality Lithium Polymer cells with PCM Protection module |
| Nominal Voltage |
7.4V |
| Capacity |
Typical |
2900 mAh (at 0.2C Discharge) |
| Minimum |
2900 mAh |
| Max. Charge Voltage |
|
8.4V +/- 0.06V |
| Max. Current |
Charge |
1.5A (approx. 0.5C recommended) |
| Discharge |
1C or limit by PCM & protection |
| Ambient temperature |
Charge |
0 deg C to 45 deg C |
| Discharge |
-20 deg C to 60 deg C |
| Storage |
-20 deg C to 35 deg C |
| Discharge Cut-Off Voltage |
|
6.0V |
| Nominal Weight |
|
Approx. 98g |
| Dimensions |
|
approx. 110mm X 46.6mm X 10.0 mm (max) |
| On-Pack Charging Module |
Supply Voltage |
Not Applicable |
| Max. Current |
Not Applicable |
| One Protection Circuit Module |
Overcharge |
8.56 +/-0.05V |
| Overdischarge |
6.00V +/-0.1V |
| Current Limit |
2.2 amp +/-1.0 |
| Short Circuit |
Protection (320uSec) |
| Normal Current Required by PCM |
3.5 uA |
| Thermistor |
|
10K Ohm NTC with Beta value =3977K |
| Wiring & Connection |
wire leads are to be 50 +/-5mm in length and 24/26AWG. Pin3 is Red (+), Pin 1 is Black (- or com) & Pin 2 is white (thermistor) to a 3-pin molex connector (housing #5105-0300) |
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_timeout_wc_related_1172', '1747236057', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)
WordPress database error: [INSERT, UPDATE command denied to user '1_04172c5_0'@'10.30.72.4' for table 'wp_options']
INSERT INTO `wp_options` (`option_name`, `option_value`, `autoload`) VALUES ('_transient_wc_related_1172', 'a:24:{i:0;s:4:\"1039\";i:1;s:4:\"1130\";i:2;s:4:\"1133\";i:3;s:4:\"1135\";i:4;s:4:\"1138\";i:5;s:4:\"1141\";i:6;s:4:\"1148\";i:7;s:4:\"1151\";i:8;s:4:\"1154\";i:9;s:4:\"1157\";i:10;s:4:\"1159\";i:11;s:4:\"1161\";i:12;s:4:\"1164\";i:13;s:4:\"1166\";i:14;s:4:\"1170\";i:15;s:4:\"1176\";i:16;s:4:\"1178\";i:17;s:4:\"1181\";i:18;s:4:\"1183\";i:19;s:4:\"1185\";i:20;s:4:\"1190\";i:21;s:4:\"1192\";i:22;s:4:\"1195\";i:23;s:4:\"1200\";}', 'no') ON DUPLICATE KEY UPDATE `option_name` = VALUES(`option_name`), `option_value` = VALUES(`option_value`), `autoload` = VALUES(`autoload`)
