| Packaging |
2 pieces of LiFePO4 cells with PCM Protection module and molex connector. |
| Nominal Voltage |
6.4V |
| Capacity |
Typical |
780 mAh (4.9Wh) @0.2C |
| Minimum |
730 mAh |
| Max. Current |
Charge |
0.3 to 0.5C recommended (at 0.02C cut-off current) |
| Discharge |
1.0 A |
| Ambient temperature |
Charge |
0 deg C to 45 deg C |
| Discharge |
-20 deg C to 60 deg C |
| Storage |
-20 deg C to 35 deg C |
| Cycle life |
approx. 2000 cycles (80% of initial capacity @0.2C rate) |
| Operation Under High Temperature of 70 deg. C |
A minimum of 60% of initial capacity at 0.3C to 0.5C charge and discharge rates |
| Nominal Weight |
|
Approx. 2.8g |
| Dimensions |
|
25.5mm L x 20.5mm W x 3.2mm T max. |
| One Protection Circuit Module |
Overcharge |
>7.3V +/-0.05V (release at 3.45Vx2) |
| Overdischarge |
<4.0V +/- 0.05V (release at 6V +/-0.1.5V) |
| Current Protection |
5.0 amp +/-2A |
| PCM current usage |
4-8uA |
| Short Circuit |
External Short Circuit Protection (delay time is 230-500uS) |
| Dimensions |
25.5mm L x 20.5mm W x 3.2mm T max. |
| Approx. Weight (g) |
50g |
| Thermistor |
Not Applicable |
| Wiring & Connection |
60mm wire leads (#28 AWG) with Molex 0781720002 connector |
